Factory making fiber to rj45 - Single-mode G657B3 super bending resistant optical fiber – GELD
Short Description:
Product Detail
Product Tags
Related Video
Feedback (2)
Factory making fiber to rj45 - Single-mode G657B3 super bending resistant optical fiber – GELD Detail:
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber.
● Low attenuation, meeting the communication requirements of O-E-S-C-L band.
● Used in various optical cables including ribbon cables, it has extremely low bending additional loss.
● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency.
● High dynamic fatigue parameters ensure the service life under ultra-small bending radius.
1. Optical fiber jumpers of various structures
2. FTTX high-speed optical routing
3. Optical cable with small bending radius
4. Small-size optical fiber device and optical device
Characteristics | Conditions | Units | Specified values | |
Optical Characteristics | ||||
Attenuation |
1310nm |
dB/km |
≤0.35 |
|
1383nm |
dB/km |
≤0.35 |
||
1550nm |
dB/km |
≤0.21 |
||
1625nm |
dB/km |
≤0.23 |
||
Attenuation vs. Wavelength |
1285~1330nm, @1310nm |
dB/km |
≤0.03 |
|
1525~1575nm, @1550nm |
dB/km |
≤0.02 |
||
Zero Dispersion Wavelength(λ0) |
– |
nm |
1300~1324 |
|
Zero Dispersion Slope(S0) |
– |
ps/(nm2·km) |
≤0.092 |
|
(PMD) |
Max. Individual Fiber |
– |
ps/√km |
≤0.1 |
Link Design Value(M=20,Q=0.01%) |
– |
ps/√km |
≤0.06 |
|
Typical value |
– |
ps/√km |
0.04 |
|
Cable cut-off wavelength(λcc) |
– |
nm |
≤1260 |
|
Mode Field Diameter(MFD) |
1310nm |
μm |
8.2~9.0 |
|
1550nm |
μm |
9.1~10.1 |
||
Effective Group Index of Refraction(Neff) |
1310nm |
1.468 |
||
1550nm |
1.469 |
|||
Point discontinuity |
1310nm |
dB |
≤0.05 |
|
1550nm |
dB |
≤0.05 |
||
Geometrical Characteristics | ||||
Cladding Diameter |
– |
μm |
125.0±0.7 |
|
Cladding Non-Circularity |
– |
% |
≤0.7 |
|
Coating Diameter |
– |
μm |
235~245 |
|
Coating-Cladding Concentricity Error |
– |
μm |
≤12.0 |
|
Coating Non-Circularity |
– |
% |
≤6.0 |
|
Core-Cladding Concentricity Error |
– |
μm |
≤0.5 |
|
Curl(radius) |
– |
m |
≥4 |
|
Delivery Length |
– |
km per spool |
Max. 50.4 |
|
Mechanical Specifications | ||||
Proof Test |
– |
N |
≥9.0 |
|
– |
% |
≥1.0 |
||
– |
kpsi |
≥100 |
||
Macro-bend Induced Loss |
1Turn Around a Mandrel of 10mm Radius |
1550nm |
dB |
≤0.03 |
1 Turn Around a Mandrel of 7.5mm Radius |
1625nm |
dB |
≤0.1 |
|
1 Turn Around a Mandrel of 7.5mm Radius |
1550nm |
dB |
≤0.08 |
|
1 Turn Around a Mandrel of 7.5mm Radius |
1625nm |
dB |
≤0.25 |
|
1 Turn Around a Mandrel of 5mm Radius |
1550nm |
dB |
≤0.15 |
|
1 Turn Around a Mandrel of ,5mm Radius |
1625nm |
dB |
≤0.45 |
|
Coating stripping force |
Typical average value |
N |
1.5 |
|
Peak value |
N |
1.3~8.9 |
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for Factory making fiber to rj45 - Single-mode G657B3 super bending resistant optical fiber – GELD , The product will supply to all over the world, such as: Ecuador, Madras, Mombasa, Aiming to grow to be by far experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Daniel Coppin from Washington - 2018.07.12 12:19
We have been looking for a professional and responsible supplier, and now we find it.
By Edwina from Jordan - 2017.11.11 11:41