Factory supplied “Optical Fiber Secondary Coating ” - Single-mode G657B3 super bending resistant optical fiber – GELD
Short Description:
Factory supplied “Optical Fiber Secondary Coating ” - Single-mode G657B3 super bending resistant optical fiber – GELD Detail:
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber.
● Low attenuation, meeting the communication requirements of O-E-S-C-L band.
● Used in various optical cables including ribbon cables, it has extremely low bending additional loss.
● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency.
● High dynamic fatigue parameters ensure the service life under ultra-small bending radius.
1. Optical fiber jumpers of various structures
2. FTTX high-speed optical routing
3. Optical cable with small bending radius
4. Small-size optical fiber device and optical device
| Characteristics | Conditions | Units | Specified values | |
| Optical Characteristics | ||||
|
Attenuation |
1310nm |
dB/km |
≤0.35 |
|
|
1383nm |
dB/km |
≤0.35 |
||
|
1550nm |
dB/km |
≤0.21 |
||
|
1625nm |
dB/km |
≤0.23 |
||
|
Attenuation vs. Wavelength |
1285~1330nm, @1310nm |
dB/km |
≤0.03 |
|
|
1525~1575nm, @1550nm |
dB/km |
≤0.02 |
||
|
Zero Dispersion Wavelength(λ0) |
– |
nm |
1300~1324 |
|
|
Zero Dispersion Slope(S0) |
– |
ps/(nm2·km） |
≤0.092 |
|
|
（PMD) |
Max. Individual Fiber |
– |
ps/√km |
≤0.1 |
|
Link Design Value（M=20，Q=0.01%) |
– |
ps/√km |
≤0.06 |
|
|
Typical value |
– |
ps/√km |
0.04 |
|
|
Cable cut-off wavelength（λcc) |
– |
nm |
≤1260 |
|
|
Mode Field Diameter（MFD) |
1310nm |
μm |
8.2~9.0 |
|
|
1550nm |
μm |
9.1~10.1 |
||
|
Effective Group Index of Refraction(Neff) |
1310nm |
1.468 |
||
|
1550nm |
1.469 |
|||
|
Point discontinuity |
1310nm |
dB |
≤0.05 |
|
|
1550nm |
dB |
≤0.05 |
||
| Geometrical Characteristics | ||||
|
Cladding Diameter |
– |
μm |
125.0±0.7 |
|
|
Cladding Non-Circularity |
– |
% |
≤0.7 |
|
|
Coating Diameter |
– |
μm |
235~245 |
|
|
Coating-Cladding Concentricity Error |
– |
μm |
≤12.0 |
|
|
Coating Non-Circularity |
– |
% |
≤6.0 |
|
|
Core-Cladding Concentricity Error |
– |
μm |
≤0.5 |
|
|
Curl(radius) |
– |
m |
≥4 |
|
|
Delivery Length |
– |
km per spool |
Max. 50.4 |
|
| Mechanical Specifications | ||||
|
Proof Test |
– |
N |
≥9.0 |
|
|
– |
% |
≥1.0 |
||
|
– |
kpsi |
≥100 |
||
|
Macro-bend Induced Loss |
1Turn Around a Mandrel of 10mm Radius |
1550nm |
dB |
≤0.03 |
|
1 Turn Around a Mandrel of 7.5mm Radius |
1625nm |
dB |
≤0.1 |
|
|
1 Turn Around a Mandrel of 7.5mm Radius |
1550nm |
dB |
≤0.08 |
|
|
1 Turn Around a Mandrel of 7.5mm Radius |
1625nm |
dB |
≤0.25 |
|
|
1 Turn Around a Mandrel of 5mm Radius |
1550nm |
dB |
≤0.15 |
|
|
1 Turn Around a Mandrel of ,5mm Radius |
1625nm |
dB |
≤0.45 |
|
|
Coating stripping force |
Typical average value |
N |
1.5 |
|
|
Peak value |
N |
1.3~8.9 |
||
Product detail pictures:
Related Product Guide:
Adhering into the theory of quality, services, efficiency and growth, now we have gained trusts and praises from domestic and international shopper for Factory supplied “Optical Fiber Secondary Coating ” - Single-mode G657B3 super bending resistant optical fiber – GELD , The product will supply to all over the world, such as: Irish, Nepal, Morocco, With the high standards of product quality and service, our products have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We are very pleased to serve customers from all over the world!
By Ivan from New Orleans - 2017.11.29 11:09
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Agustin from Birmingham - 2018.10.31 10:02
