Featured
-
Professional China optical patch cord - Polyamide – GELD
By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as microcry stallinity. Because of its crystallinity, the microcrystalline structure retains important properties such as stress cracking resistance — without clouding. The degree of crystallinity is so negligible, however, that it has no adverse effec... -
High Quality for fiber optic splicer - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET... -
China Gold Supplier for fiber network cable - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Discount wholesale “Optical Fiber ” - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Fiber Optic Patch Cable Simplex duplex optic cable connector SC UPC indoor outdoor use low insert loss fiber optic adaptor – GELD
Fiber Adapter (also known as flange, coupling) is a fiber optic connector for connection components, the product is very variety, including FC, SC, ST, LC, MTRJ, as well as carry out the transfer between each other such as: ST-SC, FC-ST, it’s widely used in optical distribution frame (ODF), fiber-optic communications equipment, instrumentation, the feature is stable and reliable. Single mode adapters are with Ceramic sleeve while multimode fiber adapters are with bronze sleeve. We can p... -
Special Price for fiber optic patch cable - Polyamide – GELD
By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as microcry stallinity. Because of its crystallinity, the microcrystalline structure retains important properties such as stress cracking resistance — without clouding. The degree of crystallinity is so negligible, however, that it has no adverse effec... -
Factory made hot-sale active optical network - Dipped coated water blocking aramid yarn for cable – GELD
Water-blocking yarn, a new product – porous fiber water-swelling water –blocking yarn used for the water blocking of new types of dry-type optical cables, is developed and produced by the Company based on new water-blocking technologies in optical and electric cable production at home and abroad. It is characterized by advantages like fast water absorption speed, high expansion ratio, strong tension stress, no acid and base, no compatible effect exerted on cables, thermo stability, chem... -
2022 Good Quality G657B3 - Single-mode G657B3 super bending resistant optical fiber – GELD
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op... -
Factory making “High Modulus Aramid ” - Optical fiber filling Jelly – GELD
The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabiliz... -
Cheap price st fiber connector - G.657A2 Bent-insensitive single-mode fiber – GELD
● Excellent attenuation coefficient and low water peak. ● O-e-s-c-l for full band transmission. ● Low bending loss. ● High fatigue strength. ● Fully compatible with G.652D networks. 1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of fiber optics include: fiber optic systems requiring low loss and high bandwidth; Especially suitable for MAN soft optical... -
Factory best selling “Reinforcing Core ” - Secondary coating material for optical cable (PBT) – GELD
Model Name Purpose JD-3019 High performance PBT loose tube material Communication and power cable Serial number Test items Company Typical value Test standard 1 Density g/cm³ 1.30 GB/T 1033 2 Melting point ℃ 215 GB/T 2951.37 3 Melt index g/10min 10.4 GB/T 3682 4 Yield strength MPa 53 GB/T 1040 5 Yield elongation % 6.1 6 Break elongation % 99 7 Tensile modulus of elasticity MPa 2167 8 Bending modulus of elas... -
Discount wholesale “Optical Fiber ” - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET...