Featured
-
Massive Selection for sc patch cord - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Hot New Products fiber optic cable - Optical fiber filling Jelly – GELD
The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabiliz... -
Personlized Products outdoor fiber optic cable - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET... -
Bottom price sfp module single mode - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Leading Manufacturer for Ftth - FTTH drop stainless steel flat Cable Clamp – GELD
The installation of this FTTH drop clamp is very easy and convenient, self- adjusting wedges, which provide the tool free installation, and easy attaching of fiber optic cable by hands. Just need to put a appropriate size flat cable on the shell, put the raised embossing shim against cable then insert wedge in shell, at last attach this clamp on drop wire hook or bracket. FTTH drop clamps passed a series of standard related type tests which are available in our internal laboratory, such as +7... -
High reputation splicing fiber optic cable - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET... -
Factory Price multimode fiber optic cable - Small-reel hot printing tape —1km per roll – GELD
The hot printing tape for cable coding and marking is used to print the batch code on the cable and wire with cabel and wire printer. The hot printing tape for cable coding and marking has yellow, blue and white color, and we can make the size as you need. The hot printing tape produces abrasion-resistant markings in high quality. In this process a heated printing wheel packet presses printing tape onto the material to be printed on. This product is a hot-print material specially used for t... -
Optical Fiber Splicing MTP/MPO Optical Fiber Patch Cord – GELD
MTP /MPO trunk cable, a cost-effective alternative to time-consuming field. termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. Different fiber sequences and different key configurations are optional. Available in SM fiber and MM fiber (9μm, 50μm, 62.5μm). Ribbon ,Ruggedized or fan-out cord is available,Available in 8/12/24 fibers. LSZH, PVC,OFNR and OFNP rated jacket are optional. It is suitable for data cente... -
Fiber Optic Line Outdoor Optical cable cross connection cabinet – GELD
Different from the traditional cable cross connecting cabinet, optical cable cross connecting cabinet(no optical fiber jumper) has the following advantages. 1. Optical splitter with reference to the full and effective access to the core wire to increase the number of cable boxes, and meet the requirements of FTTH construction. 2. Out of the cabinets bare fiber modules reduce fiber laying neatly inside the cabinet and not messy, easy operation and maintenance. 3. Core cable access effectively ... -
Super Lowest Price led fiber optic light - Aramid Yarn – GELD
Advantages: High specific strength and modulus, excellent temperature resistance, excellent fiber comprehensive performance, complete varieties. Features: Light weight, high strength and high modulus, high temperature resistance, chemical corrosion resistance, good flame retardant, good wear resistance. Application: Composite materials, protective products, elastomer reinforcement, optical cables, cables and tires, etc、 1. K-FRP (Fiber Rainforment Plastic by Aramid yarn) 2.... -
Factory source fiber optic speeds - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Fiber Optic Patch Cord Outdoor Optical cable cross connection cabinet – GELD
Different from the traditional cable cross connecting cabinet, optical cable cross connecting cabinet(no optical fiber jumper) has the following advantages. 1. Optical splitter with reference to the full and effective access to the core wire to increase the number of cable boxes, and meet the requirements of FTTH construction. 2. Out of the cabinets bare fiber modules reduce fiber laying neatly inside the cabinet and not messy, easy operation and maintenance. 3. Core cable access effectively ...