Featured
-
Factory Free sample fiber optic tester - G.657A2 Bent-insensitive single-mode fiber – GELD
● Excellent attenuation coefficient and low water peak. ● O-e-s-c-l for full band transmission. ● Low bending loss. ● High fatigue strength. ● Fully compatible with G.652D networks. 1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of fiber optics include: fiber optic systems requiring low loss and high bandwidth; Especially suitable for MAN soft optical... -
Optical Fiber Termination Fiber Optic Fast Quick Connector – GELD
The Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH, is already proving itself to be the connector of choice by incumbents,municipalities, utilities & alternative carriers. Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode and multimode fiber types, including Mu... -
Factory selling smooth frp panels - FRP glass fiber (non-metallic) strengthening core – GELD
1. Non-metallic materials, not sensitive to electric shock, suitable for lightning, rain and other climatic environment areas; 2. The FRP reinforced fiber cable can be installed next to the power line and power supply device, and will not be disturbed by the induced current generated by the power line or power supply device; 3. Compared with metal core, FRP does not produce gas due to the chemical reaction between metal and paste, which will affect the optical fiber transmission index. 4. Com... -
Factory For “Cable Filling Compound ” - Single-mode G657B3 super bending resistant optical fiber – GELD
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op... -
Good Quality single mode media converter - G.657A1 Bending-insensitive single-mode fiber – GELD
● Excellent attenuation coefficient and low water peak. ● ”O – E – S – C – L for all band transmission. ● Low bending loss. ● High fatigue strength. ● Fully compatible with G.652D network. 1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of fiber optics include: fiber optic systems requiring low loss and high bandwidth; It ... -
Popular Design for sfp module types - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET... -
Ordinary Discount Tension Flat Cable Clamp - Wall Anchoring Point Setting Hardware and multi strand Groove Fastener – GELD
Construction Description Product Name Wall Anchoring Point Setting Hardware Material The steel bracket and high strength steel nail are made of 2.0 cold stamping galvanized steel sheet and the bracket surface isorganic coating, and the plastic part is ABS. Tension Strength 600N Salt Spray Test 1000h Working Temperature -40℃～+60℃ Storage Temperature -40℃～+70℃ Relative Humidity ≤93%（+40℃） Atmospheric Pressure 70～106Kpa No Name L1 W H D Nail size L2 ... -
Quality Inspection for loose tube fiber - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Hot Selling for lc to lc coupler - Single-mode G657B3 super bending resistant optical fiber – GELD
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op... -
Shutter Sc Adapter FTTH Fiber Optic PLC Splitter series – GELD
Bare fiber PLC Mini PLC without connector SC/APC Mini type PLC Cassetle type PLC Insert type PLC Splitter Rack-mounted type PLC 1XN PLC Splitter Parameters 1X2 1X4 1X8 1X16 1X32 1X64 Operating Wavelength 1260~1650 Insertion Loss(db) Typical 3.6 6.8 10 13.1 16.2 20 Max(P/S) 3.8/4.0 7.2/7.4 10.5/10.7 13.6/13.7 16.5/16.8 20.5/21.0 Uniformity(db) Typical 0.3 0.4 0.5 0.6 0.8 1.2 Max(P/S) 0.4 0.6 0.8 1.2... -
Quality Inspection for Ftth Connection - Wire Cable Thimbles – GELD
Standard Duty Thimbles are good for the light duty rigging applications. Even with the zinc plating to help resist corrosion, these rope thimbles will be ideally suited for indoor or low-corrosive environments. A thimble is a grooved metal fitting that is manufactured to protect the fastening loop of a wire rope sling. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Greater protection a... -
Quick Coupler Optical Fiber Pigtails Terminal Box – GELD
1) Standard size, light weight and reasonable structure 2) Can be used in 19”, 23” standard distribution frame 3) Suitable for ribbon and single fiber 4) Various panel plate to fit different adapter interface 5) Front mark on the plate is easy for identification and operation 6) 12C ,24C, 36C, 48C, 72C ,96C optional, with or without fiber optic pigtails and adapters Rack Mount, Wall Mount. Suitable for FC adapter, ST adapter, SC adapter, LC adapter etc. 19 inches; 1U for 12 splice...