Featured
-
China Factory for Power Cable - Wire Cable Thimbles – GELD
Standard Duty Thimbles are good for the light duty rigging applications. Even with the zinc plating to help resist corrosion, these rope thimbles will be ideally suited for indoor or low-corrosive environments. A thimble is a grooved metal fitting that is manufactured to protect the fastening loop of a wire rope sling. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Greater protection a... -
Factory making Q Span Hook - Wall Anchoring Point Setting Hardware and multi strand Groove Fastener – GELD
Construction Description Product Name Wall Anchoring Point Setting Hardware Material The steel bracket and high strength steel nail are made of 2.0 cold stamping galvanized steel sheet and the bracket surface isorganic coating, and the plastic part is ABS. Tension Strength 600N Salt Spray Test 1000h Working Temperature -40℃～+60℃ Storage Temperature -40℃～+70℃ Relative Humidity ≤93%（+40℃） Atmospheric Pressure 70～106Kpa No Name L1 W H D Nail size L2 ... -
Good Wholesale Vendors single mode optical fiber - FRP glass fiber (non-metallic) strengthening core – GELD
1. Non-metallic materials, not sensitive to electric shock, suitable for lightning, rain and other climatic environment areas; 2. The FRP reinforced fiber cable can be installed next to the power line and power supply device, and will not be disturbed by the induced current generated by the power line or power supply device; 3. Compared with metal core, FRP does not produce gas due to the chemical reaction between metal and paste, which will affect the optical fiber transmission index. 4. Com... -
Well-designed bulk fiber optic cable - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Top Suppliers Optical Fiber Cable - Technical specification of sheath production line – GELD
Maximum production speed: 100M / min; (Φ 10mm) (different product structure, different line speed) Release coil size: PN1000~PN2000mm; Maximum weight of the tray: 3T; External diameter of cable core (max.): 30mm; Size of winding reel: PN800～PN2000mm； Maximum weight of the reel: 4T； Outer diameter of sheath (max.): 35mm±0.1mm； Meter error: ≤2‰； Additional product decay: ≤0.02dB/Km(SM、MM)； Production line color: specified by the Buyer; Line direction: specified by the Buyer Total install... -
Best Price on ethernet to fiber - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Wholesale Discount otb fiber optic - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET... -
Chinese Professional frp wall panels - Single-mode G657B3 super bending resistant optical fiber – GELD
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op... -
factory low price “Optical Fiber Paste ” - G.657A2 Bent-insensitive single-mode fiber – GELD
● Excellent attenuation coefficient and low water peak. ● O-e-s-c-l for full band transmission. ● Low bending loss. ● High fatigue strength. ● Fully compatible with G.652D networks. 1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of fiber optics include: fiber optic systems requiring low loss and high bandwidth; Especially suitable for MAN soft optical... -
Chinese Professional frp wall panels - Single-mode G657B3 super bending resistant optical fiber – GELD
● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op... -
factory low price multimode fiber cable - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Wholesale Discount “Bare Fiber ” - Secondary coating material for optical cable (PBT) – GELD
Model Name Purpose JD-3019 High performance PBT loose tube material Communication and power cable Serial number Test items Company Typical value Test standard 1 Density g/cm³ 1.30 GB/T 1033 2 Melting point ℃ 215 GB/T 2951.37 3 Melt index g/10min 10.4 GB/T 3682 4 Yield strength MPa 53 GB/T 1040 5 Yield elongation % 6.1 6 Break elongation % 99 7 Tensile modulus of elasticity MPa 2167 8 Bending modulus of elas...