Featured

  • OEM Customized adss fiber optic cable - Polyamide  – GELD

    OEM Customized adss fiber optic cable - Polyamide – GELD

    By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as microcry stallinity. Because of its crystallinity, the microcrystalline structure retains important properties such as stress cracking resistance — without clouding. The degree of crystallinity is so negligible, however, that it has no adverse effec...
  • Factory directly supply “Water-Blocking Strap ” - Optical fiber filling Jelly  – GELD

    Factory directly supply “Water-Blocking Strap ” - Optical fiber filling Jelly – GELD

    The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabiliz...
  • Discount wholesale “Optical Fiber ” - G655 Single-mode optical fiber  – GELD

    Discount wholesale “Optical Fiber ” - G655 Single-mode optical fiber – GELD

    DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET...
  • Ftth/Fttb/Fttx Fiber Optic Jumper CWDM, DWDM, FWDM Device  – GELD

    Ftth/Fttb/Fttx Fiber Optic Jumper CWDM, DWDM, FWDM Device – GELD

    Parameter CWDM Device Operating Wavelength (nm) 1260~1620nm Center Wavelength (nm) 1270~1610nm or 1271~1611nm (ITU Grid G.694.2) Channel Spacing (nm) 20nm Center Wavelength Accuracy (nm) ±0.5nm Bandwidth @ -0.5db (db) ≥13db Insertion Loss (db) Pass port:  ≤ 0.60db Reflect port: ≤ 0.40db Isolation@ Pass Channel (db) Adjacent: ≥ 30db Non-Adjacent: ≥ 40db Isolation@ Reflect Channel (db) ≥13db Directive (db) ≥50db Optical Ret...
  • Termination Box Fiber Fiber Outdoor Waterproof Pigtail   – GELD

    Termination Box Fiber Fiber Outdoor Waterproof Pigtail – GELD

    1. Adapt to all type of connector  2. Well water proof and used in outdoor environments  3. Meet to the China optical commucation division standard 4. Easily mounted and high reliability  5. The number of the core is customized 1. Long Distance Optical Communication System 2. FTTP 3. Telecommunication Network 4. CATV Network 5. Local Area Network 6. Active device termination 7. Data system network 8. FTTH CATV Optic fiber waterproof pigtail 9. water proof cables includes 4c, 6c,8c; SM, MM,ST,...
  • Hot Sale for fiber splice box - Water Blocking cable filling Jelly  – GELD

    Hot Sale for fiber splice box - Water Blocking cable filling Jelly – GELD

    In addition, pinholes and local damage plastic sheath may result in moisture from entering the cable core, the cable electrical characteristics deteriorate. It further found that the cable jacket damage is not necessarily the place where the transmission characteristics deteriorate, which gives the cable maintenance and troubleshooting a lot of trouble, so in the manufacturing process of the cable, usually three ways to ensure moisture-proof and waterproof cable that is inflated or filled wit...
  • Optical Fiber Splicing Fiber Optic Fast Quick Connector  – GELD

    Optical Fiber Splicing Fiber Optic Fast Quick Connector – GELD

    The Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH, is already proving itself to be the connector of choice by incumbents,municipalities, utilities & alternative carriers. Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode and multimode fiber types, including Mu...
  • 100% Original Factory fiber optic termination box - Single-mode G657B3 super bending resistant optical fiber  – GELD

    100% Original Factory fiber optic termination box - Single-mode G657B3 super bending resistant optical fiber – GELD

    ● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op...
  • Factory selling “PBT ” - Single-mode G657B3 super bending resistant optical fiber  – GELD

    Factory selling “PBT ” - Single-mode G657B3 super bending resistant optical fiber – GELD

    ● The minimum bending radius can reach 5mm, which is fully compatible with G.652.D fiber. ● Low attenuation, meeting the communication requirements of O-E-S-C-L band. ● Used in various optical cables including ribbon cables, it has extremely low bending additional loss. ● Accurate geometric parameters and large die field diameter ensure low welding loss and high welding efficiency. ● High dynamic fatigue parameters ensure the service life under ultra-small bending radius. 1. Op...
  • Wholesale lc lc connector - Small-reel hot printing tape —1km per roll  – GELD

    Wholesale lc lc connector - Small-reel hot printing tape —1km per roll – GELD

    The hot printing tape for cable coding and marking is used to print the batch code on the cable and wire with cabel and wire printer. The hot printing tape  for cable coding and marking has yellow, blue and white color, and we can make the size as you need. The hot printing tape produces abrasion-resistant markings in high quality. In this process a heated printing wheel packet presses printing tape onto the material to be printed on.  This product is a hot-print material specially used for t...
  • Plc Splitter CWDM, DWDM, FWDM Device  – GELD

    Plc Splitter CWDM, DWDM, FWDM Device – GELD

    Parameter CWDM Device Operating Wavelength (nm) 1260~1620nm Center Wavelength (nm) 1270~1610nm or 1271~1611nm (ITU Grid G.694.2) Channel Spacing (nm) 20nm Center Wavelength Accuracy (nm) ±0.5nm Bandwidth @ -0.5db (db) ≥13db Insertion Loss (db) Pass port:  ≤ 0.60db Reflect port: ≤ 0.40db Isolation@ Pass Channel (db) Adjacent: ≥ 30db Non-Adjacent: ≥ 40db Isolation@ Reflect Channel (db) ≥13db Directive (db) ≥50db Optical Ret...
  • factory low price “Optical Fiber Paste ” - Large-reel hot printing tape/marking tape—over 14 km per roll  – GELD

    factory low price “Optical Fiber Paste ” - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD

    The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar...