Featured
-
China Cheap price Ftth Double Layers Steel Wire Anchor Clamp - S Type fiber Cable Clamp – GELD
1. Good insulating property 2. High mechanical strength 3. Easy installation, no need additional tools 4. UV resistant thermoplastic and stainless steel material, durable 5. Excellent environment stability 6. Competitive price * S Type Fiber Cable Clamp is designed to tension steel wire dia up to 3 mm of FRP messenger of drop cable in outdoor FTTX. * Drop cable anchor clamp is used on dead-end fiber optic cables. * FTTH drop cable S-type fitting is easy in installation,and requires preparatio... -
High definition multi mode fiber - Secondary coating material for optical cable (PBT) – GELD
Model Name Purpose JD-3019 High performance PBT loose tube material Communication and power cable Serial number Test items Company Typical value Test standard 1 Density g/cm³ 1.30 GB/T 1033 2 Melting point ℃ 215 GB/T 2951.37 3 Melt index g/10min 10.4 GB/T 3682 4 Yield strength MPa 53 GB/T 1040 5 Yield elongation % 6.1 6 Break elongation % 99 7 Tensile modulus of elasticity MPa 2167 8 Bending modulus of elas... -
100% Original Wire Rope Cable Clamps - Wall Anchoring Point Setting Hardware and multi strand Groove Fastener – GELD
Construction Description Product Name Wall Anchoring Point Setting Hardware Material The steel bracket and high strength steel nail are made of 2.0 cold stamping galvanized steel sheet and the bracket surface isorganic coating, and the plastic part is ABS. Tension Strength 600N Salt Spray Test 1000h Working Temperature -40℃～+60℃ Storage Temperature -40℃～+70℃ Relative Humidity ≤93%（+40℃） Atmospheric Pressure 70～106Kpa No Name L1 W H D Nail size L2 ... -
Lowest Price for lan to fiber converter - G655 Single-mode optical fiber – GELD
DOF-LITETM (LEA) is ideal for high data-rate, multi-wavelength long haul transmission. It has a large efective area for improved power handling plus dispersion optimized for dense wavelength division multiplexing (DWDM). It is suitable for transmission in the conventional C-band (1530-1565 nm) and L-band (1565- 1625 nm). DOF-LITETM (LEA) exceeds the requirements of today’s high- channel-count 2.5 Gb/s and 10 Gb/s systems, and supports migration to next generation 40 Gb/s data rates. DOF-LITET... -
Best Price on fiber optic line - Secondary coating material for optical cable (PBT) – GELD
Model Name Purpose JD-3019 High performance PBT loose tube material Communication and power cable Serial number Test items Company Typical value Test standard 1 Density g/cm³ 1.30 GB/T 1033 2 Melting point ℃ 215 GB/T 2951.37 3 Melt index g/10min 10.4 GB/T 3682 4 Yield strength MPa 53 GB/T 1040 5 Yield elongation % 6.1 6 Break elongation % 99 7 Tensile modulus of elasticity MPa 2167 8 Bending modulus of elas... -
Fibre Termination Box Optical fiber distribution box – GELD
Types Work temperature Relative humidity The atmospheric pressure Indoor -10℃～+40℃ ≤85%(+30℃) 70kPa～106kPa Outdoor -40℃~ + 60℃ ≤95%(+40℃) 70kPa～106kPa A) The optical fiber splitting box of the corridor (indoor and external) shall be complete, and all plastic parts shall be free of burrs, bubbles, cracks, holes, warping, impurities and other defects. The thermal deformation temperature shall be ≥85℃, and the service life of the line shall be 15 years. B) The inner metal plate of t... -
Discountable price fiber optic network cable - FRP glass fiber (non-metallic) strengthening core – GELD
1. Non-metallic materials, not sensitive to electric shock, suitable for lightning, rain and other climatic environment areas; 2. The FRP reinforced fiber cable can be installed next to the power line and power supply device, and will not be disturbed by the induced current generated by the power line or power supply device; 3. Compared with metal core, FRP does not produce gas due to the chemical reaction between metal and paste, which will affect the optical fiber transmission index. 4. Com... -
Indoor Fiber Optical Patch Cord Cable Fiber Optical Armored Patch Cord – GELD
FTTH, Area network, National defence, Test equipment. According to cable structure,there are single armored and double armored types,single armor is only with stainless no braid,double armor with stainless tube and stainless braid. According to fiber cores, it is classified by simplex, 1 tube N fibers, N tubes N fibers. Simplex armored patch cord Duplex armored patch cord Multi-cores armored patch cord Duplex armored patch cord A connector SC、FC... -
PriceList for types of optical fiber - G.652D Single-mode optical fiber (B1.3)-Grade B – GELD
● The index of low-water peak non-dispersion-shifted single-mode fiber is better than ITU-T recommended G.652D and IEC B1.3 fiber technical specifications; ● Excellent optical performance, can satisfy the high efficiency of DWDM and transmission of CWDM system requirements; ● Excellent geometry size, to ensure the welding of low loss and high sealing performance; ● Low coefficient of PMD, satisfy the transmission system of long distance and high efficiency. 1. Suitable for all kinds of fib... -
Factory best selling Drop Cable Clamp - Single/double layer Steel Wire Tension Clamp – GELD
1. Twine the wire in accordance the “8” shape along the disc at the center of the wire clamp, then reverse tighten the wire at the tail 2. And then the connection handle in accordance with the “eight” word coiling bending end knot 3. Fix long core round plate bundle, auxiliary parts and lines by nylon thread screw Connect the steel wire in a single self-supporting leather fiber optic cable with the anchor point, and the span length shall not be longer than 100m. 1. It can facilita... -
Optical Fiber Termination Fiber Optic Indoor Patch Cord cable & connector – GELD
Data transmission,telecommunication,testing equipment,optical fiber CATV,WBN. Feature:PC UPC APC polishing optional,low insertion loss and high return loss,400X microscope inspecting,high credibility and stability,good in repeatability and exchange ability,single mode and multi-mode fiber optional. Patch cords are classified by connectors at both ends,there are SC、FC、LC、ST、MU、E2000、DIN、D4、LX.5、MTRJ、VF-45、and SC-FC…etc hybrid patch cords. Patch cords are classified by fibers... -
Factory wholesale Ftth Cable - Metal Cable Drop Wire Tension Clamps – GELD
The installation of this FTTH drop clamp is very easy and convenient, self- adjusting wedges, which provide the tool free installation, and easy attaching of fiber optic cable by hands. Just need to put a appropriate size flat cable on the shell, put the raised embossing shim against cable then insert wedge in shell, at last attach this clamp on drop wire hook or bracket. FTTH drop clamps passed a series of standard related type tests which are available in our internal laboratory, such as +7...