Featured
-
High definition multi mode fiber - Aramid Yarn – GELD
Advantages: High specific strength and modulus, excellent temperature resistance, excellent fiber comprehensive performance, complete varieties. Features: Light weight, high strength and high modulus, high temperature resistance, chemical corrosion resistance, good flame retardant, good wear resistance. Application: Composite materials, protective products, elastomer reinforcement, optical cables, cables and tires, etc、 1. K-FRP (Fiber Rainforment Plastic by Aramid yarn) 2.... -
100% Original fiber junction box - Large-reel hot printing tape/marking tape—over 14 km per roll – GELD
The large-reel thermal printing ribbon will take the place of traditional printing modes by its very high cost performance . The large-reel thermal printing ribbon breaks through the cost saving bottleneck of traditional time – consuming. labor 一consuming and fund- consuming printing modes. without need to replace reels frequently ,each reel of large-reel thermal printing ribbon can be used for printing 30 km - 35 km of optical cables. Emerging in response to the needs of times,the lar... -
Ftth Cable Outdoor Optical cable cross connection cabinet – GELD
Different from the traditional cable cross connecting cabinet, optical cable cross connecting cabinet(no optical fiber jumper) has the following advantages. 1. Optical splitter with reference to the full and effective access to the core wire to increase the number of cable boxes, and meet the requirements of FTTH construction. 2. Out of the cabinets bare fiber modules reduce fiber laying neatly inside the cabinet and not messy, easy operation and maintenance. 3. Core cable access effectively ... -
Discountable price fiber optic network cable - Water Blocking cable filling Jelly – GELD
In addition, pinholes and local damage plastic sheath may result in moisture from entering the cable core, the cable electrical characteristics deteriorate. It further found that the cable jacket damage is not necessarily the place where the transmission characteristics deteriorate, which gives the cable maintenance and troubleshooting a lot of trouble, so in the manufacturing process of the cable, usually three ways to ensure moisture-proof and waterproof cable that is inflated or filled wit... -
One of Hottest for Coil Winding Machine - Cable stranded cable production line – GELD
Optical cable maximum diameter Ф25mm buffer tuber diameter / quantity Ф1.5～Ф3.0mm/12 Structural speed 100m/min Typical production speed 90m/min(tie pitch 65mm, tie pitch 25mm./(Speed is related to cable pitch and reverse Angle) Cable pitch (single helix) 55～1000mm±5mm SZ stranding Angle ±12π～±16π Maximum rotational speed of tie yarn head 4000rpm Tie yarn section distance 20～50mm Meter accuracy ≤2‰ added losses ≤0.02dB/km Device color Color of mechanical part: RAL501... -
Factory Cheap “NYLON 12 ” - Dipped coated water blocking aramid yarn for cable – GELD
Water-blocking yarn, a new product – porous fiber water-swelling water –blocking yarn used for the water blocking of new types of dry-type optical cables, is developed and produced by the Company based on new water-blocking technologies in optical and electric cable production at home and abroad. It is characterized by advantages like fast water absorption speed, high expansion ratio, strong tension stress, no acid and base, no compatible effect exerted on cables, thermo stability, chem... -
Factory Price For armored fiber optic cable - Optical fiber filling Jelly – GELD
The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabiliz... -
High Quality sfp fiber module - G.652D Single-mode optical fiber (B1.3) – GELD
1. Suitable for all kinds of fiber optic cable structure: central beam tube type, loose sleeve layer stranded type, skeleton type, fiber optic cable structure; 2. Applications of optical fiber include: fiber optical systems requiring low loss and high bandwidth, such as long-distance communication, trunk lines, loop feeders, distribution lines and cable TV, etc., especially suitable for 1383nm band coarse wavelength division multiplexing (CWDM), dense wavelength division multiplexing (DWD... -
Factory Cheap fiber cable tester - Dipped coated water blocking aramid yarn for cable – GELD
Water-blocking yarn, a new product – porous fiber water-swelling water –blocking yarn used for the water blocking of new types of dry-type optical cables, is developed and produced by the Company based on new water-blocking technologies in optical and electric cable production at home and abroad. It is characterized by advantages like fast water absorption speed, high expansion ratio, strong tension stress, no acid and base, no compatible effect exerted on cables, thermo stability, chem... -
Ftth/Fttb/Fttx Fiber Optic Jumper FTTH Fiber Optic PLC Splitter series – GELD
Bare fiber PLC Mini PLC without connector SC/APC Mini type PLC Cassetle type PLC Insert type PLC Splitter Rack-mounted type PLC 1XN PLC Splitter Parameters 1X2 1X4 1X8 1X16 1X32 1X64 Operating Wavelength 1260~1650 Insertion Loss(db) Typical 3.6 6.8 10 13.1 16.2 20 Max(P/S) 3.8/4.0 7.2/7.4 10.5/10.7 13.6/13.7 16.5/16.8 20.5/21.0 Uniformity(db) Typical 0.3 0.4 0.5 0.6 0.8 1.2 Max(P/S) 0.4 0.6 0.8 1.2... -
Short Lead Time for Electric Cable Wire - Wire Cable Thimbles – GELD
Standard Duty Thimbles are good for the light duty rigging applications. Even with the zinc plating to help resist corrosion, these rope thimbles will be ideally suited for indoor or low-corrosive environments. A thimble is a grooved metal fitting that is manufactured to protect the fastening loop of a wire rope sling. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Greater protection a... -
Original Factory “Cable Filling Paste ” - Optical fiber filling Jelly – GELD
The non-Newtonian nature allows the jelly to thin out during processing and set after the processing shear forces are removed. Critical parameters that impart the necessary performance are viscosity at various shear rates and the yield stress. Typically the jelly is made using oil and an inorganic or organic thickener. Inorganic thickeners used range from organic clays to silica. These thickeners are suspended in a hydrophobic oil such as a mineral oil or synthetic oil. Additionally, stabiliz...