Wall Anchoring Point Setting Hardware and multi strand Groove Fastener

Short Description:

The wall anchoring point setting hardware is a kind of optical cable fittings, and it is used to set an anchoring point on the wall for the drop cable clamp connection. In FTTH tail installation, it is widely used to solve the cabling on outdoor wall.

Send email to us

Product Detail

Product Tags

Wall Anchoring Point Setting Hardware Product Specifications

Construction	Description
Product Name	Wall Anchoring Point Setting Hardware
Material	The steel bracket and high strength steel nail are made of 2.0 cold stamping galvanized steel sheet and the bracket surface isorganic coating, and the plastic part is ABS.
Tension Strength	600N
Salt Spray Test	1000h
Working Temperature	-40℃～+60℃
Storage Temperature	-40℃～+70℃
Relative Humidity	≤93%（+40℃）
Atmospheric Pressure	70～106Kpa

Product Size

No	Name	L1	W	H	D	Nail size L2
1	Wall hardware	22±0.5	20±0.5	32±0.5	8×10±0.5	φ3.7×39±0.2a

Multi Strand Groove Fastener Application

It can fix four straight-line wiring respectively by wall nails with an interval of no more than 15m.

Features of FTTH Fittings

1. It can facilitate the flexible layout of various use scenarios such as intermediate outgoing line;

2. The cloth is straight and nice;

3. Simple installation, independent of tool operation and suitable for single person construction;

4. The installation efficiency and construction quality of line assembly, disassembly and relocation are improved;

5. Reduce obstacles caused by external influences.

Product Specification

Size(mm)			Material	Surface Treatment	Tensile Resistance
L	W	H
120	20	22	Supporting Structure：d2.0mm Cold Rolled Plate Groove: Flame Retardant ABS	Zinc Chromium Coating Above Class 3（Supporting Structure）	<100N
*Our products are not all covered in the table. Please contact us for more information